Emerson AV101 User Manual

Presetting Radio Stations

You can preset up to 30 of your favorite AM and FM

stations, in any combination, in the tuner memory for easy

recall.

1. Press the STANDBY button on the front panel or on

the remote control to turn the system On.

2. Press either the TUNER button on the front panel or

the FUNCTION button on the remote control to select

the Tuner function. Press again to switch between

AM and FM bands if necessary.

3. Tune to the first station you wish to preset by either

the Manual or Automatic tuning method as follows:

Manual Tuning - repeatedly press the TUNING 5 or 6

buttons on the front panel or the remote control until the

desired frequency appears on the display. (Note: You

must use manual tuning if your are trying to tune to a

weak station.)

Automatic Tuning - press and hold the TUNING 5 or 6

button on the front panel or the remote control until the

display begins to scan down or up, and then release

the buttons. The Tuner will stop on the first strong

station it finds. Repeat this process until it stops on

your desired station.

4. When the desired station appears on the display

(example: FM 103.50 MHZ) press the MEMORY button

on the front panel. (Note: There is no MEMORY button

on the remote control.) The PRESET indicator and

channel 01 indicators will flash in the display for 5

seconds.

When the indicators stop flashing, the station is

memorized in Preset Memory number 1.

5. Repeat step 3 to tune to the next station to be

memorized. Press the MEMORY button on the front

panel and while the PRESET and channel 01

indicators are flashing press the PRESET TUNING 5

or 6 buttons to select preset channel memory number

02 or any other preset number from 02 to 30. When

the indicators stop flashing the station is memorized.

6. Repeat step 5 until you have stored up to 30 stations in

the tuner memory.

Recalling Preset Stations

1. Turn the system On and select the Tuner function.

2. Press the PRESET STATION 5 or 6 buttons on the

front panel or remote to scroll through all of the preset

station memories to find your desired station.

You may also use the number keys on the remote control

to go directly to any of the preset stations. To select

preset stations 1 through 9, press the corresponding

number button. To select stations from 10 to 30, press the

corresponding two number buttons.

Changing Preset Stations

Tune to the new station you want to memorize. Press the

MEMORY button on the front panel. While the PRESET

and 01 CH indicators are flashing, press the PRESET

MEMORY 5 or 6 buttons to select the memory number

you wish to change. When the indicators stop flashing the

new station is now memorized and the previous station is

deleted.

Last Station Memory

The Tuner always remembers the last station that you

were listening to before you switched to a different

function or shut the power Off. It will return to that same

station when you turn the system On again and select

the Tuner function.

Note: If the AC power is disconnected for an extended

period of time all of the stations in the tuner memory

may be deleted. You will have to store them in

memory again when power is restored.