DELL NSA 2600 User Manual

Recording Configuration Information   |   

13

Recording Configuration Information

Use this section to record your configuration information. Be 
sure to keep for future reference. 

The default MGMT interface IP address is 192.168.1.254.

Registration Information 

Internet Service Provider (ISP) Information
Record the following information about your current Internet 
service:

Serial Number: 

Record the serial number found on 
the bottom panel of your 
Dell SonicWALL appliance.

Authentication Code: 

Record the authentication code found 
on the bottom panel of your 
Dell SonicWALL appliance. 

LAN IP Address:

_____._____._____._____

Select a static IP address for your 
Dell SonicWALL appliance that is 
within the range of your local network. 
(default is 192.168.168.168)

Subnet Mask:

_____._____._____._____

Record the subnet mask for the local 
network. Client devices connecting 
through the appliance are assigned IP 
addresses in this network.
(default is 192.168.168.0)

Ethernet WAN IP Address:

_____._____._____._____

Select a static IP address for your 
Ethernet WAN. This setting only 
applies if you are already using an 
ISP that assigns a static IP address. 

Admin Name:

Select an administrator account name. 
(default is admin)

Admin Password: 

Select an administrator password. 
(default is password)

If you are 
connecting with 
DHCP

No information is usually required. However, 
some providers may require a Host Name:

 _________________________________

If you are 
connecting with 
Static IP

IP Address: _____._____._____._____
Subnet Mask:_____._____._____._____
Default Gateway: _____._____._____._____
Primary DNS: _____._____._____._____
DNS 2 (optional): _____._____._____._____
DNS 3 (optional): _____._____._____._____