Pelco 100 Series User Manual
10
C2460M-A (7/03)
Wall Mounting – The camera bracket
tab points out of the enclosure and the
top of the camera points up towards
the tab.
tab points out of the enclosure and the
top of the camera points up towards
the tab.
Ceiling Mounting – The camera bracket
tab points out of the enclosure and the top
of the camera is pointed in the opposite
direction.
tab points out of the enclosure and the top
of the camera is pointed in the opposite
direction.
CAMERA BRACKET
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
TOP OF
CAMERA
CAMERA
CAMERA BRACKET
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
TAB ALWAYS POINTS
OUT OF THE
ENCLOSURE
INSTALL AND POSITION THE CAMERA
1. Plug the video connector from the camera into the mating connector inside the back box (refer
to Figure 6).
2. Position the camera so that the tab on the camera bracket is pointing out of the enclosure,
away from the ceiling or wall. Refer to the following illustrations for proper camera orientation.
3. Install the camera bracket. Gently squeeze the bracket, place it against the shoulder inside the
back box, and gently release.
4. Turn on power to the camera and monitor.