Pelco 100 Series User Manual

C2460M-A (7/03)

13

Figure 8.  Window Adjustment

1. Domes with Liners (only) – Position the viewing window over the lens of the camera.

a. Loosen the three Phillip screws located in the dome.

b. Insert the blade of a standard screwdriver in one of the adjustment grooves. Move dome

into position.

c. Tighten the three Phillip screws to lock liner in place.

2. Align the screw holes in the trim ring with those in the Camclosure base.

3. Tighten the tamper-resistant screws with the supplied 1/8-inch hollow screwdriver bit.

LOOSEN SCREWS

ADJUSTMENT

GROOVE

DOME LINER