Panasonic WV-NS202 User Manual

56

The settings relating to the mail server and the FTP server can be configured on this page. 
The "Server setup" page has 2 tabs; the [Mail] tab and the [FTP] tab.

Click the [Mail] tab on the "Server setup" page. (

☞ page 15)

The settings relating to the mail server used to send the alarm mail can be configured on this page. 

[SMTP server address]*
Enter the IP address or the host name of the SMTP
server used to send e-mails.
Number of characters for the SMTP server address:

1 - 128 characters

[POP server address]*
When "POP before SMTP" is selected for "Authentica-
tion", enter the IP address or the host name of the POP
server.
Number of characters for the POP server address:

1 - 128 characters

When entering the host name for "SMTP server
address/POP server address", it is necessary to
configure the DNS settings on the [Network] tab of
the "Network setup" page. (

☞ page 59)

[Authentication]
Select the authentication method to send e-mails from
the following. 
None: It is not necessary to clear any authentication to

send e-mails.

POP before SMTP: It is necessary to first clear the

POP server authentication to use the SMTP server
to send e-mails. 

SMTP: It is necessary to clear the SMTP server authen-

tication to send e-mails.

Default: None

When you don’t know the authentication method to
send e-mails, refer to the network administrator. 

[User name]
Enter the user name to access the server. 
Number of characters for the user name: 1 - 32 char-

acters

[Password]
Enter the password to access the server. 
Number of characters for the password: 0 - 32 char-

acters

[Sender mail address]
Enter the mail address of a sender.
The entered mail address will be displayed in the "From"
(sender) line of the sent mails.
Number of characters for the sender mail address:

3 - 128 characters