Panasonic AW-HE120KP User Manual

Page of 100
29
Basic 
operations
 Basic operations
Camera menus are displayed on the monitor when the unit’s 
settings are to be selected.
The monitor is connected to the video signal output 
connector.
The basic camera menu operations involve displaying 
sub-menus from the Top Menu items, and selecting settings 
on the sub-menus.
Some sub-menus have menu items for performing more 
detailed settings.
The camera menu operations are conducted using the 
wireless remote control.
If a controller is connected, they can also be conducted using 
the controller.
 It may be necessary to upgrade the controller’s version in 
order to support the AW-HE120.
For further details, consult with your dealer.
Described below are the basic operations for changing the 
camera menu item settings using the wireless remote control 
and controller (AW-RP655, AW-RP555 or AW-RP50).
Only the steps taken using the wireless remote 
control will be described here for the operations 
conducted to select and set the items.
For details of the operations conducted using the 
controller, substitute “controller” for “wireless 
remote control” when reading the basic operations.
Also, refer to the Operating Instructions of the 
controller.
Table of operations
Camera menu 
operation
Wireless remote 
control
Controller
AW-RP655
AW-RP555
AW-RP50
Selecting the unit 
to be operated
Press the [CAM1], 
[CAM2], [CAM3] or 
[CAM4] button.
Press one of the [1] to [5] 
buttons of [CONTROL/
PREVIEW MONITOR OUT 
SEL].
Press one of the [1] to [5] 
buttons of [CONTROL].
Press one of the [CAMERA 
STATUS/SELECTION] buttons.
Displaying the 
Top Menu
Press the [MENU] 
button for 2 seconds.
1.  
Press the [MENU] button.
The display on the 
AW-RP655’s LCD panel 
changes to the menu mode.
2.  
Turn the jog dial (main) 
to display “CAMERA 
SETTING” on the LCD 
panel, and press the [OK] 
button.
3.  
The scene selection menu 
now appears on the LCD 
panel so select the scene to 
be set, and press the [OK] 
button.
4.  
If the “OPEN CAMERA 
MENU? 
 OK Key” 
message appears on the 
LCD panel, press the [OK] 
button again.
Press the [MENU] button for 
2 seconds.
Press the [CAMERA OSD] 
button for 2 seconds.
Selecting the 
items
Press the [
] or [] 
([
] or []) button.
Turn the jog dial (main).
Press the [YES] or [NO] button. Turn the F1 dial.
Displaying the 
sub-menus
Press the [
] button.
Press the jog dial (main).
Press the [ITEM] button.
Press the F1 dial.