Panasonic AW-HE120KP User Manual

75

Web setting



 User mng.

The authorization of those users who can access the camera from a PC or AW-RP50 and those IP addresses, from which the 
camera can be accessed, is registered on this screen in order to restrict any other access.
The screen itself consists of two tabs, “User auth.” and “Host auth.”.

   User auth.

<Initial setting: Off>
User authorization is set to “On” or “Off” here.
Enter the setting using the Set button.



 Select the “Off” setting for no user authentication 

when the AW-RP50 remote camera controller is 
connected in a network.

   User name [1 to 32 half-size characters]

<Initial setting: blank>
The user name is input here.
Enter the setting using the Set button.

   Password
  Retype password [4 to 32 half-size characters]

<Initial setting: blank>
The password is input here.
Enter the setting using the Set button.

    Access level

<Initial setting: 2. Camera control>
Select one of the following settings as the user access 
level.
Enter the setting using the Set button.

1. Administrator

This access level allows the user to 
perform all the unit’s operations.

2. Camera control

This access level allows only Control 
screen operations to be performed.

   User check

A pull-down menu can be opened here, and the registered 
users checked.
A registered user is indicated in the form of “Registered 
user name [Access level]”.
(Example: admin[1])
To delete a registered user, select the user to be deleted, 
and click the Delete button on the right.