Panasonic AW-HE130W User Manual

“Desktop” or “Hanging” is selected here as the method used to install

the unit.

Desktop: Stand-alone installation

Hanging: Suspended installation

• When [Hanging] has been selected, the top, bottom, left and right

of the images will be reversed, and up/down/left/right control for

panning and tilting will also be reversed.

When the tilt becomes the angle set for [Flip Detect Angle], the image

will be flipped in the vertical direction automatically.

Off:  The picture is not turned upside down (flipped).

Auto: The picture is automatically turned upside down (flipped).

Set the tilt angle at which the image will be flipped in the vertical

direction automatically when [Smart Picture Flip] is set to [Auto].

Set the preset speed table (Slow, Fast). During preset playback,

presets are performed at [Preset Speed] (1 to 30) values that are

based on the table set here.

• When [Preset Speed Table] is set to [Fast], [Preset Speed] values

equivalent to the AW-HE120 will be applied.

Set the pan/tilt movement speed used when recalling camera

orientation information registered to the preset memory (30 steps).

• When you set large [Preset Speed] values, the image may sway

when the movement stops.

Selected here are the setting items to be recalled when the contents

of the preset memory are regenerated.

Mode A:   Pan, Tilt, Zoom (including digital zoom), Focus, Iris, Gain,

white balance adjustment value

Mode B:   Pan, Tilt, Zoom (including digital zoom), Focus, Iris

Mode C:   Pan, Tilt, Zoom (including digital zoom), Focus

Turn the function for freezing images during preset playback off/on.

When this is set to [On], preset playback is performed with a still

of the image immediately preceding the start of preset playback

being output. The image freeze is released when preset playback is

finished.

“Off” or “On” is set here for the function used to adjust the pan-tilt

adjustment speed in conjunction with the zoom magnification.

When [On] is set, the panning and tilting operations will become

slower in the zoom status.

This function has no effect during preset operations.

Return to the previous menu level.

Select auto or manual mode for the focus adjustment function.

Auto: Always adjust focus automatically.

Manual: Adjust focus manually.

“Off” or “On” is set here for the function which compensates for out-of-

focusing when it occurs during panning, tilting or zooming operations.

When [Off] is set, adjust the focus as required after zooming or set

the focus to the auto mode.

This item can be selected only when [Manual] has been selected as

the [Focus Mode] setting.

“Enable” or “Disable” is set here for the digital zoom function.

If zooming is performed toward the Tele end beyond the maximum

position when [Enable] has been selected, the digital zoom can be

operated continuously. Zooming will stop temporarily at the position

where the optical zoom and digital zoom are switched so after it has

stopped at this position, proceed with zooming again.

When the setting is changed to [Disable] while already in the digital

zoom region, the zoom will automatically move to the maximum

position of the optical zoom.

• The digital zoom is set to OFF when color bars are displayed during

digital zooming.

Set the maximum digital zoom magnification.

Turn the digital extender function off/on.

When this is set to [On], the digital zoom will be fixed at 1.4x.

When [Digital Zoom] is set to [Enable], [Digital Extender] is disabled.

Turn the optical image stabilization function off/on.

• The OIS function's level of correction is reduced during pan/tilt

operations.

“Enable” or “Disable” is set here for the function which turns on or

turns off the tally lamp using the tally control signal.

Adjust the brightness of the tally LED.

• When this is set to [Low], the brightness is equivalent to that of the

AW-HE120.

Return to the previous menu level.

56

57