Panasonic WV-CW504S User Manual

15

Move the cursor to "DURATION TIME" and select a time for switching between color and black-and-white images from the following: 
(default: 10 seconds)
2 sec. - 10 sec. - 30 sec. - 60 sec.
  (S) 

(L)

Move the cursor to "BURST (BW)", and decide whether or not to provide a burst signal output in the black-and-white mode. 
ON (default): Provides a burst signal output. 
OFF: Does not provide any burst signal output. 

 •  Images may not be displayed appropriately without burst signals when camera images are displayed in the black-and-white mode

depending on a monitor or VCR model to be used. In such a case, set the burst signal output to "ON". 

The intelligent motion detection function allows the camera to detect motion and appearance/disappearance of an object or interfer-
ence  with  the  camera.  Detection  of  motion  and  appearance/disappearance  of  an  object  or  interference  with  the  camera  can  be 
announced by issuing an alarm signal or displaying a frame on the screen. 

 •  The  following  circumstances  may  result  in  detection  failure  or  false  detection:  Adjusting  the  detection  area  and  sensitivity  may

cause detection failure. 

•  Not enough difference in brightness between the background and the moving photographic subject, or significant changes in

brightness

•  Dirt or water drops on the lens

•  Insufficient brightness, for example, when shooting at night

•  The subject is moving straight at the camera

•  The subject is moving too fast or too slow

•  The subject is too small or too large

•  There are too many moving objects

•  Light reflected through a window or from a road surface

•  The camera is shaking

•  Entry of outside light, such as sunlight or the headlights of a car

•  Flickering fluorescent light

 •  Scene change detection may fail in the following cases:

•  The lens is partially covered or covered with a transparent item

•  The photographic subjects before and after changing the camera direction are similar

 •  False detection may occur for approx. 1 minute after turning on the power, after completing settings in the SETUP menu, or after

changing the camera view angle.