Panasonic WV-CW504S User Manual

18

Move the cursor to "AREA" and select the area for which the detection of appearance/disappearance of stationary objects is to be 
set. 
ALL (default): All areas will be set as the detection area. 
SETUP: When the setting button is pressed after selecting "SETUP", up to 2 areas can be set as the detection area. Refer to the  

description below for how to configure the settings. 

Move the cursor to "SENSITIVITY" and press the setting button. 
 

→  The "SENSITIVITY" screen appears. 

Move the cursor to "MIN SIZE" and select the minimum size of objects detected from the following: The size options will be displayed 
in a green frame in the center of the screen. In "OFF" position, any object will be detected regardless of its size. 
Perform the setup while viewing the detection result displayed on the screen. 
OFF (default)/SMALL/MEDIUM/LARGE

 •  The detection areas set in step 4 will be displayed as a white frame on the "SENSITIVITY" screen.
 •  When appearance/disappearance of a stationary object is detected, a red frame will be displayed on the "SENSITIVITY" screen.

Set the detection areas for motion detection and the detection of appearance/disappearance of stationary objects. 
Up to 2 detection areas can be set. 
Follow the procedure below. 

Move the cursor to "AREA" and select "SETUP", and then press the setting button. 
 

→  The "AREA" screen appears. 

Move the cursor onto the number to select the area number using the right or left button. 

Move the cursor to "POSITION" and press the setting button. 

"OBJECT DET" screen

Area setting screen

"MOTION DET" screen