Panasonic WV-CW504S User Manual

5

The description below explains how to operate the setup menu basically. 
The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video 
monitor. Refer to the installation guide for further information about the operation buttons. 
The operations in the setup menu can also be performed through the system controller (option). 
     

Hold down the setting button for more than 2 simultaneously 
seconds to call up the top screen of the setup menu. 
     

Press the up or down button to move the cursor to "END". 

Press  the  right  button  to  move  the  cursor  to  "SETUP",  and 
press  the  setting  button  to  change  the  setup  mode  from 
"DISABLE" to "ENABLE". 
     

The setup mode changes to "ENABLE", and the setup menu 
becomes ready to be set. 
     

Move  the  cursor  to  the  item  to  be  set,  and  press  the  setting 
button. 
     

The selected setup screen in the setup menu appears on the 
screen. 

 •  If  the  top  screen  of  the  setup  menu  is  called  up  with  the

operation buttons while a camera image is displayed, the 
setup  mode  is  always  "DISABLE"  to  prevent  operation 
errors. 

    To  configure  the  settings  in  the  setup  menu,  change  the 

setup mode to "ENABLE". 

 •  The cursor is a reversely highlighted part.

     

Perform the settings for each item. 
 •  Selection of setting item:
    Press the up or down button to move the cursor. 
 •  Change of settings:
    Press the right or left button. 
 •  Display of advanced setup screen:
    Press the setting button when "

O" is attached to the tar-

get setting item. 

 •  Return to previous setup screen:
    Move the cursor to "RET" and press the setting button. 
 •  Return to the top screen:
    Move the cursor to "TOP" and press the setting button. 

To  return  to  the  camera  image  screen,  move  the  cursor  to 
"END" and press the setting button.