Panasonic WV-CP304 User Manual

Step 4

Move the cursor to "POSITION" and press the [SET ] button.

Step 5

Press the [uP], [dOwN], [rIghT] and [lEfT] buttons to move to the upper-left part of the area
to be set, and press the [SET ] button.

Step 6

Press the [uP], [dOwN], [rIghT] and [lEfT] buttons to move to the lower-right part of the area
to be set, and press the [SET ] button.

Digital noise reduction function setting [DNR]

The digital noise reduction function reduces noise automatically under the condition of low illu-
minance.
The effect level of the noise reduction function is selectable from the following.
LOW: low level of noise reduction (small residual image)
HIGH (default): high level of noise reduction (large residual image)

Black-and-white mode setting [D&N (IR) ]

CP310

CP300

[D&N (ELE) ]

CP310

CP300

The settings relating to the black-and-white mode can be configured. follow the procedure
below.

AUTO1

**D&N(IR) **(1)

LEVEL

HIGH

DURATION TIME

S L

BURST(BW)

RET TOP END

.I..

“CAMERA SETUP” screen

“D&N (IR)” screen

**CAMERA SETUP**

SCENE1

ALC/ELC ALC

SHUTTER OFF

AGC ON(HIGH)

SENS UP OFF

WHITE BAL ATW1

DNR HIGH

AUTO1

VMD

RET TOP END

D&N(IR)

OFF

Step 1

Move the cursor to "d&N (Ir)" or “d&N (ElE)” and select the mode from the following.

CP310

CP300

AUTO1 (default): Automatically switches between color and black-and-white images

in accordance with the illuminance. The black-and-white mode is
selected for dark images, and the color mode is selected for bright
images.

AUTO2: used for environment illuminated by near-infrared lamp. (wavelength

≥ 800 nm)

ON: displays black-and-white images.

OFF: displays color images.