Panasonic AW-HE130K User Manual

Setting/releasing the limiters

1. Press the [MENU] button.

Tap the button (rather than pressing it). When it is pressed for 2

seconds, the camera menu will appear.

If this happens, press the [MENU] button again for 2 seconds to clear

the camera menu.
Then start again from step

2. Press the [4], [5], [b] or [a] button for 2 seconds while

holding down the [PRESET] button.

The limiter for the upper limit, lower limit, left limit or right limit is set

(or released) using these direction buttons, respectively. The tally

lamp will blink at this time. When a limiter is set, it blinks once; when a

limiter is released, it blinks twice.
If any other button was operated between steps

and

, start again

from step

Setting the limiters

The limiter positions can be set by following the steps below.

When the position is set, the tally lamp blinks once.

1. Press one of the <CAM1> to <CAM4> button to select the

unit.

•

Setting the upper limit position of the movement range

Press the [4] or [5] button of the wireless remote control to turn

the unit as far as the position which will serve as the upper limit.

Next, perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [4] button

for 2 seconds while holding down the [PRESET] button.)

•

Setting the lower limit position of the movement range

Press the [4] or [5] button of the wireless remote control to turn

the unit as far as the position which will serve as the lower limit.

Next, perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [5] button

for 2 seconds while holding down the [PRESET] button.)

•

Setting the left-most limit position of the movement range

Press the [b] or [a] button of the wireless remote control to turn

the unit as far as the position which will serve as the left-most

limit.

Next, perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [b] button

for 2 seconds while holding down the [PRESET] button.)

•

Setting the right-most limit position of the movement range

Press the [b] or [a] button of the wireless remote control to turn

the unit as far as the position which will serve as the right-most

limit.

Next, perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [a] button

for 2 seconds while holding down the [PRESET] button.)

Releasing the limiters

The limiter positions that are set can be released by following the steps

below.

When the position is released, the tally lamp blinks twice.

1. Press one of the <CAM1> to <CAM4> button to select the

unit.

2. Release the limiters by taking the steps below.

•

Releasing the upper limit position of the movement range

Perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [4] button

for 2 seconds while holding down the [PRESET] button.)

•

Releasing the lower limit position of the movement range

Perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [5] button

for 2 seconds while holding down the [PRESET] button.)

•

Releasing the left-most limit position of the movement range

Perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [b] button

for 2 seconds while holding down the [PRESET] button.)

•

Releasing the right-most limit position of the movement range

Perform the steps in “Basic limiter operations”.

(Press the [MENU] button quickly and then press the [a] button

for 2 seconds while holding down the [PRESET] button.)

Resetting the limiters

To reset the limiters, the currently established settings must be released.

The limiter positions that are set can be reset by following the steps

below.

1. Release the settings of the limiter positions to be reset

by following the steps in “Releasing the limiters”.

2. Set the limiter positions by following the steps in

“Setting the limiters”.

110

111