Panasonic AW-HE130K User Manual

The video format is changed on this screen.

For details on how to change the format, refer to “Changing the

In the case of the 480/59.94p(i) or 576/50p(i) format, the P signal is

output to the HDMI connector, and the I signal is output to the SDI

output and analog component output connectors.

The down-conversion mode is selected here.

This setting is used when the aspect

ratio of the monitor is to be set to 16:9.

If the monitor is set to the 4:3 aspect

ratio, the images will be squeezed in the

width direction and extended in the height

direction.

This setting is used when the aspect ratio

of the monitor is to be set to 4:3. With the

vertical height serving as the reference,

the parts which extend beyond this at the

two sides are cropped changing the view

of the angle.

This setting is used when the aspect ratio

of the monitor is to be set to 4:3. With the

horizontal width serving as the reference,

black bands are added at the top and

bottom changing the view of the angle.

This item is selected to switch the frame frequency.

• When the frequency is switched, [Format] is set as follows.

1080/59.94p



1080/50p

1080/29.97p



1080/25p

1080/23.98p



1080/25p

1080/59.94i



1080/50i

1080/29.97PsF



1080/25PsF

1080/23.98PsF



1080/25PsF

720/59.94p



720/50p

480/59.94p(i)



480/59.94p(i)

• For details on how to change the frequency, refer to “Changing the

This is only enabled when [Frequency] is set to [59.94Hz].

Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for the

VIDEO OUT signal.

Return to the previous menu level.

54

55