Panasonic AW-HE130K User Manual

This is selected to display the IP address which has been set for the

unit.

This is selected to display the subnet mask which has been set for

the unit.

This is selected to display the default gateway which has been set for

the unit.

• On this screen, the [IP Address], [Subnet Mask] and [Default Gateway]

settings can be displayed but they cannot be changed.

To change an address, use “Network” (→page @@) on the Web

setting screen or “Easy IP Setup Software” (→page @@).

Return to the previous menu level.

 

„

When [Initialize] is selected on the [Maintenance] screen, the [Initialize]

screen appears.

• When the cursor is moved to [O.K.] on the [Initialize] screen and the

setting is entered, the [Menu settings initialized] screen is displayed for

5 seconds, and the camera settings are restored to the settings which

were established when the camera was purchased.

However, the [Format] settings and [Frequency] settings (→ page 55)

and network settings are not initialized.

• Operation returns to the Top Menu screen when the initialization

operation is completed. At this point, set the unit to the STANDBY

mode, and then set it to the POWER ON mode again. (See page 25)

• The [Format] and [Frequency] settings are not initialized.

• The [AWB] and [ABB] adjustment values are not initialized.

• When the cursor is moved to [CANCEL] on the Initialize screen

and the setting is entered, the [Menu settings unchanged] screen is

displayed for 5 seconds, the initialization operation is not performed,

and the [Maintenance] screen returns to the display.

60

61