Panasonic AW-HE120 User Manual
16
Manual shooting
(continued)
Manually adjusting the iris
The lens iris can be adjusted manually.
When performing the operations
using the wireless remote control
1
Press the [M/IRIS] button to switch the iris to
manual adjustment.
manual adjustment.
2
Adjust the iris using the [IRIS +] or [IRIS –]
button.
button.
Press the [IRIS +] button to adjust the lens iris in the
opening direction; conversely, press the [IRIS –] button to
adjust the lens iris in the closing direction.
The speed of the iris and other adjustments can be
switched to fast or slow by pressing the [FAST] or
[SLOW] button, respectively.
opening direction; conversely, press the [IRIS –] button to
adjust the lens iris in the closing direction.
The speed of the iris and other adjustments can be
switched to fast or slow by pressing the [FAST] or
[SLOW] button, respectively.
3
If necessary, press the [A/IRIS] button to return
the iris to the automatic adjustment.
the iris to the automatic adjustment.
When performing the operations using the controller
When the AW-RP655 is connected:
1
Press the [IRIS] button several times to turn
off the button’s lamp and switch to manual
adjustment.
off the button’s lamp and switch to manual
adjustment.
2
Adjust the iris manually by turning the dial
above the lit [IRIS] lamp whether it is the lamp
of the [PAN/TILT] lever or [ZOOM] lever.
above the lit [IRIS] lamp whether it is the lamp
of the [PAN/TILT] lever or [ZOOM] lever.
3
If necessary, press the [IRIS] button several
times and turn on its lamp to return the iris to
the automatic adjustment.
times and turn on its lamp to return the iris to
the automatic adjustment.
When the AW-RP555 is connected:
1
Press the [IRIS] button to turn off its lamp and
switch to manual adjustment.
switch to manual adjustment.
2
Turn the [LEVEL] dial of [IRIS] to adjust the iris
manually.
manually.
The position of the [LEVEL] dial does not represent an
absolute value.
This is why the brightness may differ from one camera to
another even when the dial is set to the same position.
absolute value.
This is why the brightness may differ from one camera to
another even when the dial is set to the same position.
3
If necessary, press the [IRIS] button to turn on
its lamp and switch to automatic adjustment in
order to return the iris to automatic adjustment.
its lamp and switch to automatic adjustment in
order to return the iris to automatic adjustment.
When the AW-RP50 is connected:
Refer to the Operating Instructions of the controller.