Panasonic AW-HE120KE User Manual

Page of 100
50
Setting the camera menu items
(continued)
 Max Digital Zoom
[x2, x3, x4, x5, x6, x7, x8, x9, x10]
The upper limit for the digital zoom magnification is set 
here.
 Tally Enable [Disable, Enable]
“Enable” or “Disable” is set here for the function which 
turns on or turns off the tally lamp using the tally control 
signal.
 Wireless Control [Disable, Enable]
“Enable” or “Disable” is set here for operations conducted 
from the wireless remote control.
The operations are enabled when the unit’s power is 
turned on from an external device other than a wireless 
remote control, and they are disabled when the power is 
turned on from a wireless remote control.
 At the point when this item’s setting is changed, the 
new setting is not reflected in operation.
It is reflected when the unit is set to the standby 
mode and its power is turned on.
 Follow one of the procedures below if the item’s 
setting is changed by mistake and the unit can no 
longer be operated from a wireless remote control.
When menu operations can be performed using 
another control device:
  First change the item using a control device 
capable of performing menu operations, and 
then turn off the unit’s power and turn it back 
on.
When menu operations cannot be performed 
using other control devices:
1.  Turn off the power of the units and devices 
that are connected.
2.  Disconnect the unit’s power cable, and plug it 
back in.
3.  Perform the operation for turning on the unit’s 
power from the wireless remote control.
4.  After changing this item, turn off the unit’s 
power and turn it back on.
Notes
Return
Use this to return to the previous menu.
  Other 3/3 screen
     Other 3/3 
 OSD Mix
  SDI Out               On
  HDMI Out              On
  Component Out         On
  Video Out             On
 OSD Off With Tally    Off
 OSD Status            Off
 Return
     OSD Mix
Whether the camera menus, statuses and other displays 
are to be turned Off or On can be selected here for each 
output picture.
SDI Out [Off, On]
HDMI Out [Off, On]
Component Out [Off, On]
Video Out [Off, On]
Off:   The camera menus and statuses are not displayed 
on the output pictures targeted by the setting items 
listed above.
On:   The camera menus and statuses are displayed for 
the output pictures covered by the setting items listed 
above.
 OSD Off With Tally [Off, On]
This is used to enable or disable the function for clearing 
the camera menu and status displays when the tally signal 
is received by a command or contact.
When the tally signal is released, the original camera 
menu displays are restored.
   OSD Status [Off, On]
“On” or “Off” is set here for the status display which 
appears during AWB operations.
Return
Use this to return to the previous menu.