Panasonic WV-CW504FK User Manual

Step 4

Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.

Note:

• The area corresponding to the selected number will be displayed in a green frame, while the other set areas are shown in a white

frame.

Step 5

Use the up, down, right, and left buttons to determine the right lower position of the area to be set and press the setting button.

→ The asterisk mark "*" will be displayed after the number and the area setting will be saved.

Note:

• To delete the area, select the area number and press the setting button after moving the cursor to "DEL".
• To change the settings of the area, select the area number and repeat from step 3.

Setting of scene change detection

This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing
the camera direction largely.
Follow the procedure below.

Step 1

Move the cursor to "i-VMD" and press the setting button.

→ The "i-VMD SETUP" screen appears.

Step 2

Move the cursor to "SCENE CHANGE" and select from the following.
ON: Provides an alarm signal when scene change is detected.
OFF (default): Disables scene change detection.

**i-VMD SETUP**(1)

MOTION DET

OBJECT DET OFF

SCENE CHANGE OFF
INDICATOR OFF

ALARM CONT

RET TOP END

"i-VMD SETUP" screen

**CAMERA SETUP**

SCENE1

ALC ALC

SHUTTER OFF

AGC ON(HIGH)

SENS UP OFF

WHITE BAL ATW1

DNR HIGH

BW MODE AUTO1

i-VMD

RET TOP END

"CAMERA SETUP" screen