Panasonic AW-HE120WE User Manual
64
Web setting screen
(continued)
Brightness
Picture Level [–10 to +10]
This menu item is selected to set the target picture level
for automatic exposure compensation.
Its setting takes effect when “Auto” or “ELC” has been
selected as the setting for any of the following automatic
exposure compensation functions.
for automatic exposure compensation.
Its setting takes effect when “Auto” or “ELC” has been
selected as the setting for any of the following automatic
exposure compensation functions.
Iris Mode
Auto
Shutter Mode
ELC
Gain
Auto
Frame Mix
Auto
Iris Mode [Manual, Auto]
This menu item is used to select whether the iris is to be
adjusted automatically or manually.
adjusted automatically or manually.
Manual
The iris is adjusted manually.
Auto
Auto exposure compensation is performed
so that the target level which was set using
Picture Level is reached.
so that the target level which was set using
Picture Level is reached.
Shutter Mode [Off, Step, Synchro, ELC]
Select for camera shutter speed.
When a higher shutter speed is selected, fast-moving
subjects do not become blurred easily but the images will
be darker.
When a higher shutter speed is selected, fast-moving
subjects do not become blurred easily but the images will
be darker.
Off
The shutter is set to OFF.
Step
The step shutter is set (the steps can be
changed).
changed).
Synchro The synchro shutter is set (the setting can be
changed continuously).
ELC
The electronic shutter is controlled and the
light quantity is adjusted automatically.
light quantity is adjusted automatically.
The shutter speeds that can be set are listed below.
[When 59.94 Hz has been set as the frequency]
When “Step” is selected as
the “Shutter Mode”
the “Shutter Mode”
When “Synchro” is selected
as the “Shutter Mode”
as the “Shutter Mode”
1/100, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
1/2000, 1/4000, 1/10000
60.17 Hz to max. 644.25 Hz
(255 steps)
(255 steps)
[When 50 Hz has been set as the frequency]
When “Step” is selected as
the “Shutter Mode”
the “Shutter Mode”
When “Synchro” is selected
as the “Shutter Mode”
as the “Shutter Mode”
1/120, 1/250, 1/500, 1/1000,
1/2000, 1/4000, 1/10000
1/2000, 1/4000, 1/10000
50.19 Hz to max. 537.12 Hz
(255 steps)
(255 steps)
Gain [Auto, 0dB to 18dB]
The image gain is adjusted here.
In locations which are too dark, adjust the gain upward;
conversely, in locations which are too bright, adjust it
downward.
When “Auto” is set, the light quantity is adjusted
automatically.
The noise increases when the gain is increased.
The Gain setting is fixed at Auto when “Frame Mix” has
been set to “Auto”.
In locations which are too dark, adjust the gain upward;
conversely, in locations which are too bright, adjust it
downward.
When “Auto” is set, the light quantity is adjusted
automatically.
The noise increases when the gain is increased.
The Gain setting is fixed at Auto when “Frame Mix” has
been set to “Auto”.
AGC Max Gain [6dB, 12dB, 18dB]
When “Auto” is selected as the “Gain” setting, the
maximum gain-up amount can be set.
maximum gain-up amount can be set.
Frame Mix
[Auto, Off, 6dB, 12dB, 18dB, 24dB]
Select for frame addition (gain-up using sensor storage)
amount.
When frame addition is performed, it will appear as if the
images are missing some frames.
This menu item cannot be set when 1080i is used as the
format.
The Gain setting is fixed at Auto when “Frame Mix” has
been set to “Auto”.
amount.
When frame addition is performed, it will appear as if the
images are missing some frames.
This menu item cannot be set when 1080i is used as the
format.
The Gain setting is fixed at Auto when “Frame Mix” has
been set to “Auto”.
Auto F.Mix Max Gain
[0dB, 6dB, 12dB, 18dB, 24dB]
When “Auto” for the “Frame Mix” is selected, the maximum
frame addition amount can be set.
If frame addition is performed at the Auto setting, it will
appear as if the images are missing some frames.
This menu item cannot be set when 1080i is used as the
format.
frame addition amount can be set.
If frame addition is performed at the Auto setting, it will
appear as if the images are missing some frames.
This menu item cannot be set when 1080i is used as the
format.
Under lighting generated by fluorescent lights,
mercury lamps or other discharge lamps, the
brightness may change synchronously, the colors
may vary, and horizontal stripes may run vertically.
In cases like this, it is recommended that the
electronic shutter speed be set to 1/100 in areas
where the power line frequency is 50 Hz and that
the electronic shutter be set to OFF in areas where
the power line frequency is 60 Hz.
brightness may change synchronously, the colors
may vary, and horizontal stripes may run vertically.
In cases like this, it is recommended that the
electronic shutter speed be set to 1/100 in areas
where the power line frequency is 50 Hz and that
the electronic shutter be set to OFF in areas where
the power line frequency is 60 Hz.
Note
ND Filter [Through, 1/4, 1/16, 1/64]
This is for selecting the transmissivity of the ND filter
(light-dimming filter) which is incorporated in the lens.
(light-dimming filter) which is incorporated in the lens.