Panasonic VL-GC001A User Manual
9
Introduction and Installation
Installing the door station
Make sure to install the door station on a flat, vertical wall.
Important information:
On the bottom surface of the door station, there is a hole to allow water to drain. Do not
cover it up when installing.
On the bottom surface of the door station, there is a hole to allow water to drain. Do not
cover it up when installing.
1
Unscrew the hex-head screw using the longer end of the allen wrench and remove the
mounting bracket from the rear of the door station.
mounting bracket from the rear of the door station.
L
The pin hole camera is not a screw to be touched or removed.
Hex-head screw
(Attached to the door station)
(Attached to the door station)
Allen wrench
Mounting bracket
Pin hole camera
VL-GC001A.book Page 9 Monday, February 28, 2005 12:08 PM