Aiphone AC-10F User Manual

2

English

Nederlands

Français

Deutsch

Español

General Prohibitions  

Prohibition to Dismantle the Unit

General Precautions

1.  Do not connect any non-specified power source to the 

V, V terminals, and do not install two power supplies in 
parallel to a single input. Fire, damage to the unit, or 
system malfunction could result.

2.  The unit is not explosion-proof. Do not install or use 

near gases or flammable materials. Fire or explosion 
could result.

3.  Do not dismantle or alter the unit. Fire or electric shock 

could result.

4.  Do not allow the wires or DC output terminals to be 

shorted. Fire or electric shock could result.

1.  When mounting the unit on a wall, install the unit in a 

convenient location, but not where it could be jarred or 

bumped. Injury could result.

2.  Do not install or make any wire terminations while 

power supply is plugged in. It can cause electrical 

shock or damage to the unit.

3.  Before turning on power, make sure wires are not 

crossed or shorted. Fire or electric shock could result.

4.  Do not install the unit in any of the following locations. 

Fire, electric shock, or unit trouble could result.

  *  Places subject to dust, oil, chemicals, hydrogen sulfide 

(hot spring).

  *  Places subject to moisture and humidity extremes, 

such as bathroom, cellar, greenhouse, etc.

  *  Places where the temperature is quite low, such as 

inside a refrigerated area or in front of air-conditioner.

  *  Places subject to steam or smoke (near heating or 

cooking surfaces).

  *  Where noise generating devices such as dimmer 

switches, invertor electrical appliances, are closeby.

1.  This product, being a control unit of door release, 

should not be used as a crime-prevention device.

2.  This product is weather-resistant, but do not spray 

high-pressure water on it. Unit trouble could result.

3.  The product becomes inoperative during power failure.
4.  As to other manufacturer's devices, such as sensor, 

door releases, timer, used with this system, comply 
with the Specifications and Warranty conditions 
manufacturers or venders present.

RECORD OF SETTINGS AND REGISTRATION DETAILS  … 1

PRECAUTIONS …………………………………………… 2

PACKAGE CONTENTS  …………………………………… 2

NAMES ……………………………………………………… 3

MOUNTING ………………………………………………… 3

MOUNTING/WIRING METHOD, WIRING DISTANCE …… 4

FUNCTIONS SETTING UP  ……………………………… 5

OPERATIONS ……………………………………………… 9

TECHNICAL PRECAUTIONS  …………………………… 9

SPECIFICATIONS ………………………………………… 9

WARRANTY ………………………………………………… 9

TEMPLATE FOR AC-10S MOUNTING BRACKET (SCALE 1:1)  … 42