APC NBES0306 Leaflet
Customer support and warranty information is available at the APC Web site, www.apc.com.
© 2008 American Power Conversion. All rights reserved. All APC trademarks are property of American
Power Conversion. Other trademarks are property of their respective owners.
Power Conversion. Other trademarks are property of their respective owners.
990-3376
5/08
*990-3376*
NetBotz
®
Vibration Sensor (NBES0306)
Installation Instructions
Inventory
Installation
Vibration sensor with 3.65-m (12-ft)
cable (1)
22-mm (7/8-in) hook and loop
fastener (1)
203-mm (8-in) tie wrap (10)
Adhesive cable tie holder (5)
RJ-45 coupling (1)
Caution: Make sure you connect this
sensor to a Sensor port on applicable
NetBotz products. See your NetBotz
product documentation for details.
sensor to a Sensor port on applicable
NetBotz products. See your NetBotz
product documentation for details.
Note: The typical location for the vibration
sensor is on a main support in the top half of
the enclosure. Avoid installing the sensor
near a cooling unit, which could cause the
sensor to give false alarms.
sensor is on a main support in the top half of
the enclosure. Avoid installing the sensor
near a cooling unit, which could cause the
sensor to give false alarms.
Note: You can extend the length of the
sensor cable up to 30.5 m (100 ft) using the
RJ-45 coupling and standard CAT-5 cabling.
sensor cable up to 30.5 m (100 ft) using the
RJ-45 coupling and standard CAT-5 cabling.