SVAT Electronics 2CV500 - 4CH User Manual
44
CV500 - 4CH
Method 1 (Recommended):
Add the DVR’s IP address to the Trusted Sites in Internet Explorer.
1. Open up Internet Explorer.
2. Click on TOOLS.
3. Click on INTERNET OPTIONS.
4. Click on the SECURITY Tab.
5. Click on TRUSTED SITES.
6. Click on the SITES button.
7. Type in the IP address of the DVR in the following format: http://192.168.0.93
and click ADD.
and click ADD.
8. If Require server verification (https:) for all sites ...” is selected you will need to
uncheck the selection box.
uncheck the selection box.
9. Change the default settings for the TRUSTED SITES zone to low. Click on
DEFAULT LEVEL and change the security level of the zone to “Low”. This can be
done by running the slider to the bottom. This will allow ActiveX controls from
the DVR to be downloaded and the DVR to be viewed on the computer.
DEFAULT LEVEL and change the security level of the zone to “Low”. This can be
done by running the slider to the bottom. This will allow ActiveX controls from
the DVR to be downloaded and the DVR to be viewed on the computer.
10. Click Apply.
11. Click OK.
The IP address used in the example above is for internal network viewing.
If you are trying to access the DVR from a remote location you will add the
“External IP Address” to the trusted sites list. See Finding your External IP
Address.
If you are trying to access the DVR from a remote location you will add the
“External IP Address” to the trusted sites list. See Finding your External IP
Address.
NETWORK GUIDE...continued