SonicWALL 170 User Manual
Page 18
Click Restart to complete the configuration process. The SonicWALL security appliance
will reboot, which will take approximately one minute. When the Test LED is no longer lit,
the SonicWALL security appliance is ready for network traffic.
will reboot, which will take approximately one minute. When the Test LED is no longer lit,
the SonicWALL security appliance is ready for network traffic.
6
6
Testing Your Connection
1. After the SonicWALL TZ 170 Wireless reboots and the login page reappears, open
another Web browser and navigate to:
If you can view the SonicWALL home page, you have configured your
SonicWALL TZ 170 Wireless correctly.
SonicWALL TZ 170 Wireless correctly.
2. If you cannot view the SonicWALL home page, try a second URL.
3. If you still cannot view a Web page, try one of these solutions:
3. If you still cannot view a Web page, try one of these solutions:
Restart your Management Station
Your management station may need to restart to accept new network settings
from the DHCP server in the SonicWALL security appliance.
from the DHCP server in the SonicWALL security appliance.
Restart your DSL Modem
Your DSL Modem may need to restart to communicate with the DHCP Client in
the SonicWALL security appliance.
the SonicWALL security appliance.
Enter a Host Name in your WAN DHCP Settings
If you selected DHCP for your WAN settings, you may need to specify a host
name for your connection:
a. Check with your ISP to see if a host name is required.
b. Go
name for your connection:
a. Check with your ISP to see if a host name is required.
b. Go
to
Procedure 4, “Accessing the Management Interface” on page 9, and
use the LAN IP address you set in Procedure 5, Step 6: “LAN Settings” on
page 15.
page 15.
c. Log in as “admin” with your administrative password.
d. In the menu on the left, click
d. In the menu on the left, click
.
e. In the Interfaces table, click the configure icon
in the WAN line.
f. In
the
WAN Properties window, enter the host name and click OK.
Run the Setup Wizard
Use the Setup Wizard again to reconfigure your network settings:
a. Go
a. Go
to
Procedure 4, “Accessing the Management Interface” on page 9, and
use the LAN IP address you set in Procedure 5, Step 6: “LAN Settings” on
page 15.
page 15.
b. Log in as “admin” with your administrative password.
c. Click
c. Click
the
Wizards button in the top, right corner of the management
interface to restart the wizard.
d. Select
Setup and click Next to start the Setup Wizard.