Soundcraft RK-65K User Manual
(User ID Number 12)
(ADD)
(ENTER)
(MODE)
(ENTER)
(Mode Number 9)
Radio Key
®
RK-65K Operating Guide
Secura Key
10
You can also place a reader in this mode by entering the
Program Mode (see page 8) then pressing Mode followed by
“9” followed by Enter.
Program Mode (see page 8) then pressing Mode followed by
“9” followed by Enter.
+ 9 +
While the LED is fl ashing Red/Green present one User
Card for each Facility Code being used to the reader, one
at a time. After you are fi nished, allow the reader to time
out and return to the Normal Mode before proceeding.
NOTE: An invalid facility code will beep with no LED visible.
Card for each Facility Code being used to the reader, one
at a time. After you are fi nished, allow the reader to time
out and return to the Normal Mode before proceeding.
NOTE: An invalid facility code will beep with no LED visible.
ADDING AND DELETING USERS (RK65K)
Add A Transponder (Key Tag or Card) To The System:
Place the unit in the Program Mode (See Page 8). Press Add,
followed by the sequence of digits representing the Transponder
ID number. Then press Enter. For example, to add transponder
#12 to the reader the following sequence would be followed:
Place the unit in the Program Mode (See Page 8). Press Add,
followed by the sequence of digits representing the Transponder
ID number. Then press Enter. For example, to add transponder
#12 to the reader the following sequence would be followed:
+ 1 + 2 +
Transponder number 12 is now valid.