VIVOTEK FD8164 User Manual

 

 

This section explains how to configure a wired network connection for the Network 

Camera.

LAN

Select this option when the Network Camera is deployed on a local area network (LAN) and is 

intended to be accessed by local computers. The default setting for the Network Type is LAN. 

Please rememer to click on the 

Save button when you complete the Network setting.

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned 

by the DHCP server each time the camera is connected to the LAN.

Use fixed IP address: Select this option to manually assign a static IP address to the Network 

Camera. 

1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the 

2. Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP or 

network administrator.

Subnet mask: This is used to determine if the destination is in the same subnet. The default value 

is “255.255.255.0”.

Default router: This is the gateway used to forward frames to destinations in a different subnet. 

Invalid router setting will disable the transmission to destinations across different subnets.