APC NBRK0570 User Manual

If you select “v3” as the SNMP version, the dialog asks for the following 

information:

Click Global SNMP Settings to configure SNMP settings for scanned devices for all SNMP target 
communications. The Global SNMP Settings window contains the following fields: 

User

The user name for the SNMP device.

Authentication 
Protocol

The authentication protocol used to access the SNMP device. 
Available choices are “None”, “MD-5”, and “SHA-1”

Password/Verify

The password for the user. Re-enter the password in the Verify 
field. The password must be a minimum of 15 characters.

Encryption Algorithm The encryption algorithm for the SNMP device. Available choices 

are “None”, “56-bit DES”, and “128-bit DES”.

Encryption Password/
Verify

The password used for the encryption protocol. Re-enter the 
password in the Verify field.

Scan interval

The number of minutes between scanned target queries.

Maximum route hops

The maximum number of hops recorded and saved by scanners 
providing route tracing support.

Number of Device Scanners in use The number of device scanners being used.

Maximum number of Device 
Scanners

The maximum number of device scanners supported by this appliance.

Device descriptions version

The version of the device descriptions data file stored on the device.

Update device descriptions

Scanners use a device descriptions data file to identify the System 
Model, Type, and Vendor value for SNMP targets. NetBotz periodically 
updates the contents of the device descriptions file to include new target 
types. Click Update Device Descriptions to contact the NetBotz Web 
site or browse to a local device descriptions update file and update the 
content of the scanners device description file.