VIVOTEK FE8171V User Manual

 

 

Advanced Mode

This section explains how to configure the image settings of the Network Camera. It is 

composed of the following four columns: General settings, Preference, Exposure, and Privacy 

mask.

Timestamp and video title: Enter a name that will be displayed on the title bar of the live video as the 

picture shown below.

2011/03/13  17:08:56

Video 17:08:56  2011/03/13

Video Title and Time

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the display

of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling)

to correct the image orientation. Please note that the preset locations will be cleared after flip/mirror.

Mount type: There are 3 Mount types - Ceiling, Wall, and Floor. 

Ceiling: The Ceiling mount type automatically delivers upside-down images. 

Wall: The Wall mount type applies to the monitoring of long, side-to-side surveillance areas, such as 

a corridor. Different Mount types have effects on the Display mode settings. For example, the 

(1 Panoramic & 2 Regional) and 

1P3R (1 Panoramic & 3 Regional) Display modes are only available 

for the “Wall“ Mount type.