VIVOTEK FD8167-(T) User Manual

 

 

This chapter explains how to restore the Network Camera to factory default, upgrade firmware 

version, etc�

This feature allows you to upgrade the firmware of your Network Camera� It takes a few minutes to 

complete the process� 

 

Follow the steps below to upgrade the firmware:

1. Download the latest firmware file from the VIVOTEK website. The file is in .pkg file format.

2� Click 

Browse… and specify the firmware file.

3� Click 

Upgrade� The Network Camera starts to upgrade and will reboot automatically when the upgrade 

    completes�

If the upgrade is successful, you will see “Reboot system now!! This connection will close”� After that, re-

access the Network Camera�

The following message is displayed when the upgrade has succeeded�  

The following message is displayed when you have selected an incorrect firmware file.

This feature allows you to reboot the Network Camera, which takes about one minute to complete� When 

completed, the live video page will be displayed in your browser� The following message will be displayed 

during the reboot process�

If the connection fails after rebooting, manually enter the IP address of the Network Camera in the 

address field to resume the connection.

Starting firmware upgrade...

Do not power down the server during the upgrade.

The server will restart automatically after the upgrade is 

completed.

This will take about 1 - 5 minutes.

Wrong PKG file format

Unpack fail

Reboot system now!!

This connection will close.