VIVOTEK FD8167-(T) User Manual

 

 

This section explains how to configure the image settings of the Network Camera� It is 

composed of the following four columns: General settings, Picture settings, Exposure, and 

Privacy mask�

Video title

Show_timestamp_and video_title_in_video_and_snapshots: Enter a name that will be displayed on 

the title bar of the live video as the picture shown below�

Video Title

Title and Time

Video 17:08:56  2014/09/09

2014/09/09  17:08:56

Position of timestamp and video title on image: Select to display time stamp and video title on the 

top or at the bottom of the video stream� 

Timestamp and video title font size: Select the font size for the time stamp and title. Color: Select to 

display color or black/white video streams�

Color: Select to display color or black and white video streams. 

Power line frequency: Set the power line frequency consistent with local utility settings to eliminate 

image flickering associated with fluorescent lights� Note that after the power line frequency is 

changed, you must disconnect and reconnect the power cord of the Network Camera in order for 

the new setting to take effect�

Video orientation: Flip--vertically reflect the display of the live video; Mirror--horizontally reflect the 

display of the live video� Select both options if the Network Camera is installed upside-down (e�g�, 

on the ceiling) to correct the image orientation� Please note that if you have preset locations, those 

locations will be cleared after flip/mirror setting.