TP-LINK TL-SC3230N Leaflet

Megapixel Surveillance Camera

Wireless N Megapixel Surveillance Camera

Chrome

Firefox

Safari

Resource CD

Ethernet Cable

Power Adapter

Mounting Bracket

 Megapixel Surveillance Camera

Wireless N Megapixel Surveillance Camera

QIG

TL-SC3230N

(*Internet Explore Browser is recommended.)

(*The pictures are for reference only.)

The following operating systems are supported:

The product model shown in this QIG is TL-SC3230N, as an example.

7106504101

It is recommended to mount the Camera where objects often pass, 

and the direction towards the door or passage is much better, see 

the illustration below:

Do not keep the Camera exposed 

to direct sunlight.

Do not place the Camera in high 

humidity  environments  such  as 

in a kitchen.

Do not place the Camera where 

there  are  high  temperatures 

such as near an oven.

Do  not  place  the  Camera  near 

devices  that  emit  radio  waves, 

such as mobile phones.

Connect the LAN port on Camera to the LAN Port of your 
router or switch with an Ethernet cable.

Connect the power adapter cord to the Power jack.

Plug the power adapter into the power outlet.

Before proceeding, confirm that your PC is connected to your 
Router and can access the Internet.
Make sure that your Router’s DHCP feature is enabled. If not, 
please refer to your Router’s instruction to enable it.

Windows 2000
Windows Vista

Internet Explorer 8 or higher

Windows 2003
Windows 7

Windows XP

The following browsers are supported:

Built-in Microphone

Audio Output Jack

RESET Button

LAN Port

RESET Button 

While the camera is ready, press RESET button for at least 5 seconds and 

release  it.  The  camera  will  be  restored  to  default  settings  and  reboot 

again.

Power/ 

Wireless

LED

LAN LED

The camera is powered off.
The camera finishes boot-up and is ready to serve. Power on 

the camera, the LED will light up and then go off to booting 

process. After keeping off for several seconds, the LED  will be 

solid orange.
The camera has been connected to a wireless network.
No cable is linked to the camera.
Data is  being transmitted or received.

Status
Off 

Flash Green

Flash Orange
Solid Green

Solid Orange

* The Antenna and Flash Orange status are for TL-SC3230N only.

Antenna

Micro-SD Card Slot

Lens & Focus Ring

Power Jack

Ethernet Cable

Ethernet Cable

Power/Wireless LED

LAN LED

*

*