Avaya 03-300430 User Manual

Communication Manager Maintenance-Object Repair Procedures

1070 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers

Figure 53: Far-End Internal Loop-Back Test (#797)

Table 365: Test #797 Far-End Internal Loop-Back Test

Error
Code

Test
Result

Description / Recommendation

2000

ABRT

Timed out while waiting for a response from the circuit pack.

1. Retry the command at 1-minute intervals up to 3 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 3 times.

2300

ABRT

The downlink message necessary to run this test could not be sent.

1. Retry the command at 1-minute intervals up to 3 times.

2301

ABRT

The timer could not be set before sending the downlink message
necessary to run this test.

1. Retry the command at 1-minute intervals up to 3 times.

2316

ABRT

Fiber link is not administered.

●

Use add fiber-link to administer the DS1 converter.

2321

ABRT

DS1 facility is not busied out.

●

Use busyout ds1-facility to busyout the DS1 facility.

●

If there is only one DS1 facility, use busyout board to busyout the

DS1 converter circuit pack.

2332

ABRT

For this system configuration, test is not allowed to execute at the far end
when there is only one DS1 facility available.

1. Execute the test at the other end of the DS1 converter complex.

1 of 2

DS1 Facility

DS1CONV

. . .

Loop at internal interface

for the DS1 facility

DS1CONV

CSU

Test starts here

CSU