Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
1286 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
Fiber Link Reset Test (#768)
This test is destructive.
This test resets both endpoints of the fiber link and is executed via reset fiber-link F P
Any DS1 converter circuit packs on the fiber link are not reset. The reset fiber-link 
command should almost never be used. It may be necessary to use it when the endpoint circuit 
packs enter a mode in which they cannot communicate with software. When necessary, always 
reset fiber endpoints with the command instead of reseating the endpoint circuit packs.
For EI-to-EI fibers that connect an IPSI PN, the EI on the PN is reset first followed by the EI on 
the IPSI PN. For EI-to-EI fiber links that connect two PNs, one EI is reset first followed by the 
other.
For an EI-SNI fiber link in which the EI is on the PN, the SNI is reset first followed by the EI.
For an EI-SNI fiber link in which the EI is on a PN, the SNI is reset first followed by the EI.
For an SNI-to-SNI fiber link, the SNI farthest from the PN is reset first followed by the SNI 
nearest to the PN.
240
FAIL
The SNI Endpoint 2 is physically connected to a DS1 converter, but is not 
assigned to be connected to one. Use list fiber-link to display a fiber 
link’s endpoints.
Either replace the DS1 converter with fiber:
1. Enter list fiber-link to verify that the fiber-optic and metallic 
cable connections are installed as assigned
2. Disconnect the SNI endpoint from the DS1 converter
3. Enter add fiber-link to reconnect the SNI to its assigned fiber
or
Add a DS1 converter complex to the SNI’s fiber:
1. Enter list fiber-link to locate this SNI endpoint’s fiber
2. Enter remove fiber-link for this SNI endpoint’s fiber
3. Enter add fiber-link to replace the fiber and to assign the DS1 
Converter complex
PASS
The administered data and the circuit packs the SNI(s) can communicate 
with match.
Table 440: Test #759 Configuration Audit  (continued)
Error 
Code
Test 
Result
Description / Recommendation
 22 of 22