Avaya 03-300430 User Manual

Page of 2574
HYB-LINE (Hybrid Line)
Issue 1 June 2005
1341
 
Hybrid Line Local Digital Loop-Around Test (#58)
This test checks the control channel between the media server and the port’s digital circuitry. 
The media server sends transparent data to the on-board microprocessor and compares the 
data echoed back. This test is repeated three times.
Table 468: Test #58 Hybrid Line Local Digital Loop-Around Test 
Error 
Code
Test 
Result
Description / Recommendation
ABRT
Internal system error.
1. Retry the command at 1-minute intervals up to 5 times.
1000
ABRT
System resources required to run this test are not available. The port may 
be busy with a valid call.
1. Use display port location to determine the station extension 
number of the port. Use status station to determine the service 
state of the port. If the port is in use, wait until it is idle before testing.
2. If the port status is idle, then retry the command at 1-minute intervals up 
to 5 times.
1004
ABRT
The port was seized by a valid call during the test. The test has been 
aborted.
1. Use display port location to determine the station extension 
number of the port. Use status station to determine the service 
state of the port. If the port is in use, wait until it is idle before testing.
2. Retry the command at 1-minute intervals up to 5 times.
2000
ABRT
Response to the test was not received within the allowable time period.
1. Retry the command at 1-minute intervals up to 5 times.
 1 of 2