Avaya 03-300430 User Manual

Page of 2574
IP-SVR (IP Server Interface)
Issue 1 June 2005
1421
 
Push-Button Switch
The push-button switch is used to administer the switch ID and the cabinet number of the IPSI. 
This button can also be used to erase the manually programmed IP address. Inserting the IPSI 
board with the button pressed or just resetting it while the button is pressed will keep the IPSI in 
boot mode.
Clock status
TN2312BP, 
(same as 
TN2182B)
Amber
Flashing
2.7 sec on
0.3 sec off
Active: Master clock, using offboard 
synchronization source.
Winking
0.3 sec on
2.7 sec off
Active: Master clock, using its local reference 
source.
Steady on
Active: Board has been reset and is providing 
clocks but has not been told which 
synchronization source to use.
Steady off
Standby: Applying no tones to the network.
“Jingle Bells”
Green and Amber
0.1 sec on, 0.2 
sec off,
0.1 sec on, 0.4 
sec off,
0.4 sec on, 0.4 
sec off
Standby: Tone generator is being used.
Double blink
Amber
0.3 sec on, 0.3 
sec off,
0.3 sec on, 2.4 
sec off
Active: Lost all external references and is in 
holdover mode.
Random
Standby: This LED may come on and off 
intermittently as ETR-PTs on the board are 
used for tone-detection services.
Emergency 
transfer
(TN2312BP)
Red
On
Emergency transfer is active.
Off
Emergency transfer is inactive.
Table 509: IPSI LEDs  (continued)
Function
LED
State
Description
 2 of 2