Avaya 03-300430 User Manual

Page of 2574
Communication Manager Maintenance-Object Repair Procedures
1492 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
 
TN775D Maintenance Circuit Pack
Used with a TN2312AP IPSI Circuit Pack
Connectivity when installed in an Existing System
There is no backplane connectivity from the TN775D Maintenance circuit pack to the 
TN2312AP IPSI circuit pack in existing pre-R11carrier backplanes. To achieve connectivity for 
pre-R11 carriers, a faceplate cable must be used. The faceplate cable runs between the 
TN775D and the TN2312AP IPSI circuit packs faceplates.
Note:
Note:
The TN775D maintenance circuit pack is located in slot one of Control Carrier A. 
The associated TN2312AP IPSI circuit pack is located in slot two of Control 
Carrier A.
Backplane Connectivity when Installed in a New System
New systems PN Control Carriers have backplane connectivity between the TN775D 
Maintenance circuit pack located in slot one of the new PN Control Carrier and the TN2312AP 
IPSI circuit pack located in slot two. No face plate cable is needed.
Error Log Entries and Test to Clear Values
Table 535: PN’s Maintenance Circuit Pack Error Log Entries 
Error
Type
Aux
Data
Associated Test
Alarm
Level
On/Off
Board
Test to Clear Value
0 (
)
0
Any
Any
Any
test maintenance sh r 1
1 (
)
0
PN Maintenance 
Circuit Pack Reset 
(#306)
MIN
ON
test maintenance l
0
MGR I Channel Loop 
test (#228)
MIN
ON
test maintenance sh r 3
Any
Sanity Handshake test 
(#106)
1537 (
0
1
Sanity Maze test 
(#303)
MIN
ON
test maintenance sh r 3
2049 (
Any
Battery Holdover 
Vintage Verification 
Test (#311)
WRN
ON
test maintenance sh r 1
 1 of 2