Avaya 03-300430 User Manual

You need 2 power sources for the monitor and the modem in order to complete this procedure.

The TN802 circuit pack must be booted with a local mouse and keyboard connected to it for 
these devices to work.

1. Connect the VGA monitor to the VGA connector of the TN802 external cable.

2. Plug the monitor into an AC power receptacle, and turn it on.

3. Attach the keyboard to the keyboard connector of the TN802 external cable assembly.

4. Attach the mouse to the mouse connector of the TN802 external cable assembly.

5. Insert the circuit pack to cause it to boot.

This section contains information for troubleshooting

●

●

Test the external connections to the LAN by pinging the local host, the external IP trunk server, 
and another device connected to the network.

1. Click Start in Windows (lower left-hand corner), then select Programs, then Command 

Prompt.

This starts a DOS command-line session.

2. At the command prompt, type ping 127.0.0.1 (the local host’s default address), and 

press Enter.

If configured correctly, the system displays:

If there is no reply, escalate the problem or replace the circuit pack. The problem is not with 
the external network but within the circuit pack.