Avaya 03-300430 User Manual

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 3 times.

2500

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

2801

ABRT

The TN802B/TN2302 Media Processor board has not been administered 

on the ip-interfaces screen.

ANY

FAIL

The test did not detect the test tone through the looparound connection.

1. Test the tone-clock in the port network that contains the media 

processor under test.

2. If the tone-clock is healthy, test the media processor board again.

3. If the test continues to fail, replace the media processor board.

PASS

The board is functioning properly.

0

NO

BOARD

No board was detected by the test.

1. Resolve either wrong board (Error 125) or no board (Error 131) 

issues, if applicable.

2. Check that the board is properly translated and inserted. If so, check 

for hyperactivity (Error 1538). If hyperactive, use reset board 
location.

3. Run the test again. If it fails, the NCE chip on board may be bad. 

Replace the board and retest.

 2 of 2