Avaya 03-300430 User Manual

1 to 17 

FAIL

The test failed because the MM710 interface Media Module detected 

errors in the received framing bits pattern. The Error Code equals the 

number of misframes detected by the MM710 interface Media Module 

since the last misframe alarm inquiry test. Major bit and minor bit error 

rate (error types 2561 and 2817) error logs often accompany misframe 

alarms. Clearing the cause of these error logs may clear the misframes 

which are occurring.
If the MM710 connects to a T1 network facility or to another switch, do 
the following:

1. Retry the command at 1-minute intervals for a maximum of 5 times.

2. Enter  list measurement ds1-log GGGVS to read the error 

seconds measurement.

3. Verify that both endpoints of the DS1 link are administered using 

the same signaling mode, framing mode, and line coding.

4. Check the physical connectivity of the MM710 interface Media 

Modules and the cable.

5. Replace the local MM710 interface Media Module, and repeat the 

test.

6. Contact T1 Network Service or the technician at the remote switch 

to diagnose the remote DS1 endpoint.

 2 of 4