Avaya 03-300430 User Manual
MG-VOIP (MM760 MED PRO DSP PORT)
Issue 1 June 2005
1651
MG-VOIP (MM760 MED PRO DSP PORT)
S8700 | 8710
/
S8500
/
S8300
/
G700
The MM760 Media Module provides the audio bearer channels for voice over IP calls, and is
under control of the G700. One MM760 Media Module has one VOIP-MM media processing
resource. Based on system administration of audio codecs, a VOIP-MM can handle either 64 or
32 simultaneous channels of H.323 audio processing. If the IP Parameters form specifies only
G.711 mu-law or G.711 a-law as the audio codecs, the VOIP-MM can service 64 channels. If any
other codec type (G.723-5.3K, G.723-6.3K, or G.729) is administered, the VOIP-MM can only
service 32 channels.
under control of the G700. One MM760 Media Module has one VOIP-MM media processing
resource. Based on system administration of audio codecs, a VOIP-MM can handle either 64 or
32 simultaneous channels of H.323 audio processing. If the IP Parameters form specifies only
G.711 mu-law or G.711 a-law as the audio codecs, the VOIP-MM can service 64 channels. If any
other codec type (G.723-5.3K, G.723-6.3K, or G.729) is administered, the VOIP-MM can only
service 32 channels.
Error Log Entries and Test to Clear Values
Notes:
a. Error Type 0: run the short test sequence first. If every test passes, run the long test
sequence. Refer to each test’s description, and follow its procedures.
b. Error Type 257: refer to the appropriate test description and follow the recommended
procedures.
MO Name in
Alarm Log
Alarm Log
Alarm
Level
Level
Initial Command to Run
Full Name of MO
MG-VOIP
MIN
WRN
test port location [short/long]
[repeat#] | [clear]
Voice Over IP
Table 610: VOIP-MM Error Log Entries
Error
Type
Type
Aux
Data
Data
Associated Test
Alarm
Level
Level
On/Off
Board
Board
Test to Clear Value
0 (
0
Any
Any
Any
test board location
) 65535
Control Channel
Loop Test (#52)
MIN
ON
test board location l r 2