Avaya 03-300430 User Manual

0

NO

BOARD

The test could not relate the internal ID to the port (no board). This could 
be due to incorrect translations, no board is inserted, an incorrect board is 
inserted, or an insane board is inserted.

1. Ensure that the board translations are correct. Execute the add ds1 

location command to administer the MM710 interface if it is not 

already administered.

2. If the board was already administered correctly, check the error log to 

determine whether the board is hyperactive. If this is the case, the 
board is shut down. Reseating the board will re-initialize the board.

3. If the board was found to be correctly inserted in step 1, then enter 

the busyout board location command.

4. Enter the reset board location command.
5. Enter the release board location command.
6. Enter the test board location long command. 

This should re-establish the linkage between the internal ID and the port.

 2 of 2