Avaya 03-300430 User Manual

Page of 2574
MODEM-PT (Modem Pool Port)
Issue 1 June 2005
1693
 
5004
ABRT
The test was not able to allocate the analog portion of the Modem Pool 
Port.
1. Follow the repair procedures for Error Code 5000.
5005
ABRT
The test was not able to establish a connection for the analog portion of 
the Modem Pool Port.
1. Follow the repair procedures for Error Code 5000.
5006
FIL
The Modem Pool Port did not respond to the "maintenance activate" 
message. This error is internal to the Modem Pool circuit pack and does 
not involve external equipment or interfaces. The test failed. This error is 
internal to the Pooled Modem circuit pack and does not involve external 
equipment or interfaces.
1. Busyout both of the TN758 Pooled Modem conversion resources on 
the circuit pack containing the failing conversion resource.
2. If the test continues to fail, replace the Pooled Modem circuit pack 
and retest.
3. If the circuit pack fails after replacement, escalate the problem.
5007
ABRT
The Network Control Channel allocated for this test did not respond to the 
incoming call indication.
1. Follow the repair procedures for Error Code 5001.
5009
ABRT
The Network Control Channel allocated for this test did not handshake 
correctly.
1. Attempt the test again.
2. If the same error occurs, test the DATA-CHL circuit pack using the 
test data-module command (refer to the DATA-CHL maintenance 
strategy).
3. If the DATA-CHL circuit pack tests pass, escalate the trouble report.
5010
FAIL
The Data Loop Around Test failed, indicating a probable problem with the 
TN758 Pooled Modem circuit pack.
1. Follow the repair procedure for Error Code 5006.
Table 624: Test #98 Modem Pool Conversion Resource Loop-Around Test  (continued)
Error
Code
Test
Result
Description / Recommendation
 5 of 6