Avaya 03-300430 User Manual

1000

ABRT

System resources required to run this test are not available. The port may 
be in use on a valid ISDN-PRI test call. Use list isdn-testcall to 

determine whether the port is in use (listed in the M/T Port column). If so, 
wait for the test call to finish as indicated in the Start Time and Duration 
fields, or abort the test call with clear isdn-testcall grp#/mem#, 

where grp#/mem# is determined from the B-channel field of list 
isdn-testcall.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort and the port is idle, escalate the problem.

1001

ABRT

System resources required to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1002

ABRT

The system could not allocate time slots for the test. The system may be 
under heavy traffic conditions or it may have time slots out of service due 
to TDM-BUS errors.

1. If the system has no TDM-BUS errors and is not handling heavy traffic, 

repeat test at 1-minute intervals up to 5 times.

2. If the test continues to abort, escalate the problem.

1003

ABRT

The system could not allocate a tone receiver for the test. The system may 
be oversized for the number of tone detectors present or some tone 
detectors may be out-of-service.

1. Resolve any TTR-LEV errors.

2. Resolve any TONE-PT errors.

3. If neither condition exists, retry the test at 1-minute intervals up to 5 

times.

4. If the test continues to abort, escalate the problem.

 1 of 2