Avaya 03-300430 User Manual

This test verifies that the packet-bus fault-detection and maintenance function of the M/T-PKT is 
functioning properly. This is done by having the M/T-PKT perform a self-test. If the self-test 
passes, then the Packet Bus Port Health Inquiry test passes. If the self-test fails or 
Communication Manager cannot communicate with the M/T-PKT, then the test fails

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

System resources necessary to run this test are not available.

1. Retry the command at 1-minute intervals up to 5 times.

2500

ABRT

An internal operation failed, and the test could not be completed.

1. Retry the command at 1-minute intervals up to 5 times.

2059

FAIL

The M/T-PKT has reported a failure of the on-board self-test.

2060

FAIL

The M/T-PKT has reported an invalid state for the packet bus.

2061

FAIL

Communication Manager cannot communicate with the M/T-PKT, but 
can communicate with the Maintenance/Test circuit pack.

1. Retry the command.

2. If the test continues to fail, replace the Maintenance/Test circuit pack, 

and retry the command.

3. If the test continues to fail, see

or 

on page 1799 to determine whether 

the M/T-PKT failure is being caused by a packet-bus fault.

PASS

The M/T-PKT packet-bus fault-detection capability is operating correctly.