Avaya 03-300430 User Manual
Communication Manager Maintenance-Object Repair Procedures
1738 Maintenance Procedures for Avaya Communication Manager 3.0, Media Gateways and Servers
System Technician-Demanded Tests:
Descriptions and Error Codes
Descriptions and Error Codes
Investigate tests in the order presented below. Clearing Error Codes associated with the one
test may also clear errors generated from other tests in the sequence.
test may also clear errors generated from other tests in the sequence.
NPE Crosstalk Test (#6)
One or more Network Processing Elements (NPEs) reside on each circuit pack with a TDM-bus
interface. (The TN464 UDS1 circuit pack has one SCOTCH-NPE chip instead of several NPE
chips.) The NPE controls port connectivity and gain, and provides conferencing functions on a
per-port basis. The NPE Crosstalk test verifies that this port’s NPE channel talks on the
selected time slot and never crosses over to time slots reserved for other connections. If the
NPE is not working correctly, one-way and noisy connections may be observed. This test is
usually only part of a port’s long test sequence and takes about 20 to 30 seconds to complete.
interface. (The TN464 UDS1 circuit pack has one SCOTCH-NPE chip instead of several NPE
chips.) The NPE controls port connectivity and gain, and provides conferencing functions on a
per-port basis. The NPE Crosstalk test verifies that this port’s NPE channel talks on the
selected time slot and never crosses over to time slots reserved for other connections. If the
NPE is not working correctly, one-way and noisy connections may be observed. This test is
usually only part of a port’s long test sequence and takes about 20 to 30 seconds to complete.
Order of Investigation
Short Test
Sequence
Long Test
Sequence
Sequence
D/ND
1
1. D = Destructive; ND = Nondestructive
NPE Crosstalk test (#6)
G700
: Aborts with Error Code 1412
X
ND
Conference Circuit test (#7)
G700
: Aborts with Error Code 1412
X
ND
DS1 OPS Switchhook Inquiry test (#312)
X
X
ND
Audit and Update test (#36)
X
X
ND
Table 644: Test #6 NPE Crosstalk Test
Error
Code
Code
Test
Result
Result
Description / Recommendation
ABRT
Could not allocate system resources to run this test or an internal
system error (software) occurred.
system error (software) occurred.
1. Retry the command at 1-minute intervals up to 5 times.
1000
ABRT
Could not seize the port for testing. The port may be in use on a valid
call. Use status station or status trunk to determine when the
call. Use status station or status trunk to determine when the
port is available for testing.
1. Retry the command at 1-minute intervals up to 5 times.
1 of 4