Avaya 03-300430 User Manual

1070

FAIL

Internal software response.

1. Wait one minute and attempt the test again.

2. If the same error persists after five attempts in one-minute intervals, 

escalate the problem.

1072

FAIL

Poor response from auxiliary channel.

1. Test the Network Control (Netcon) circuit pack using the test 

data-module command.

2. If the test fails, replace the Digital Line circuit pack.

1073

FAIL

Internal System Error.

1. Wait one minute and attempt the test again.

2. If the same error persists after five attempts in one-minute intervals, 

escalate the problem.

1074

FAIL

Internal System Error

1. Make sure that the data equipment connected to the data module is 

powered.

2. For an (M)PDM, verify that the Data Terminal “Ready” LED is ON, or 

for an (M)TDM, verify that the Data Set Ready LED is ON. If it is not 
on, check the cable from the data equipment to the data module.

1075

FAIL

Unknown message received during test.

1. Attempt the test again.

2. If the same error occurs, test the Network Control Data Channel 

using the test data-module command and a known working data 

module.

3. Replace the Digital Line circuit pack and repeat the test.

4. If the test continues to fail, escalate the problem.

2040

FAIL

Internal System Error

1. Repeat the test.

2095

FAIL

Internal System Error

1. Repeat the test.

PASS

Data Module Loop-around test passed.

 6 of 6