Avaya 03-300430 User Manual

1024–

1096

FAIL

Firmware

1. This may be the result of old firmware not supporting new software 

operation. Verify the IPSI circuit pack’s firmware vintage and 
download the new firmware if appropriate.

2. The firmware image on the IPSI circuit pack may have been 

corrupted. Download the firmware image.

3. Retry the command.

4. If the same Error Code occurs:

The standby IPSI’s Packet Interface module has bad Translation RAM 
locations. A MINOR alarm is generated when the number of bad 
locations is from 1 and 4. A MAJOR alarm is generated if the number of 
bad locations is 5 or more. The MAJOR alarm prevents a planned IPSI 
interchange. A planned interchange may be administered to occur 
automatically every 24 hours, or it may be requested with set 
ipserver-interface location.

1. If a MAJOR alarm is associated with this error, replace the alarmed 

standby IPSI circuit pack.

2. If a MINOR alarm is associated with this error, replace the alarmed 

standby IPSI circuit pack at a time that would cause the least 
disruption to service.

PASS

The media server can communicate with the IPSI circuit pack’s Packet 
Interface module.

1. If problems are still reported on the Packet Interface, check for 

failures using the Private Loop-around test (#885) and Maintenance 
Loop-around test (#886).

 4 of 4