Avaya 03-300430 User Manual

1000

ABRT

The port is in use or PPP link is connected.

1. Use status clan-port location to determine when the port is 

available for testing.

2. Use busyout port location to force the port to the idle state.

This command is destructive, causing every call and link using the port to 

be torn down.

1002

ABRT

No TDM bus timeslots available for the test.

1. Retry the command at 1-minute intervals up to 5 times.

1963

ABRT

Firmware indicates that the port is in use or ppp link is connected.

1. Use status clan-port location to determine when the port is 

available for testing.

2. Use busyout port location to force the port to the idle state.

This command is destructive, causing every call and link using the port to 

be torn down.

2000

ABRT

Did not receive circuit pack test response within the allowable time period.

1. If this problem persists, reset the circuit pack (busyout board 

location, reset board location, and release board 
location).

2. If the problem persists, replace the circuit pack.

2012

ABRT

Internal system error.

1. Retry the command at 1-minute intervals up to 3 times.

2100

ABRT

Could not allocate the necessary system resources to run test.

1. Retry the command at 1-minute intervals up to 5 times.

FAIL

C-LAN circuit pack detected test failure.

1. If the problem persists, reset the circuit pack (busyout board 

location, reset board location, and release board 
location).

2. If the problem persists, replace the circuit pack.

PASS

Port circuitry functioning properly.