Avaya 03-300430 User Manual

1005

ABRT

The test was aborted due to a configuration problem. This test may not be 

applicable, or it may be disruptive to terminal equipment other than a voice 

terminal (for example, the modem pool member or Music On Hold).

2000

ABRT

Response to the test request was not received within the allowable time 
period.

1. Retry the command at 1-minute intervals up to 5 times.

2100

ABRT

Could not allocate the necessary system resources to run this test.

1. Retry the command at 1-minute intervals up to 5 times.

1

FAIL

This does not indicate a hardware problem. The switchhook audit failed. 
The other updates were not performed because of this failure. This may 
occur when the audit is performed at the same time the terminal equipment 
goes off-hook. Use status station to determine when the port is 

available.

1. Retry the command at 1-minute intervals up to 5 times.

5

FAIL

This may be an internal software error. The message waiting lamp update 
failed. The translation and ringer updates were not performed because of 
this failure.

1. Retry the command at 1-minute intervals up to 5 times.

7

FAIL

The translation update failed. There may be an internal software error. The 
ringer update was not performed because of this failure.

1. Retry the command at 1-minute intervals up to 5 times.

8

FAIL

This does not indicate a hardware problem. There may be an internal 
software error. The ringer update failed.

1. Retry the command at 1-minute intervals up to 5 times.

PASS

The software and the port processor have the same status. User-reported 

troubles on this port should be investigated by using other port tests, by 

examining station wiring, or by examining the station.

 2 of 2