Avaya 03-300430 User Manual

FAIL 

(

cont’d

)

3. If list configuration power-supply C does show a power 

supply, extend the TDM/LAN/Serial Bus to another carrier, and repeat 
the procedure in the previous step. When a carrier that causes the fault 
to recur is added, perform Procedure 1 for only the circuit packs in that 
carrier.

4. If list configuration power-supply C fails to show any 

power supplies, and Procedures 1 and 2 have not resolved the 
problem, the added carrier(s) are defective and must be replaced.

5. If the Serial Bus repair procedures were unsuccessful, replace the 

TN2312BP IPSI circuit pack.

6. If all else fails, and there is only one power supply in the system, 

replace the power supply.

PASS

At least one power supply responded to a status query from the TN2312BP 

IPSI. 

 5 of 5